厂家

Print 邮件 PDF 
厂家
Microchip Technology Inc
一家领先的智能、连接和安全嵌入式控制解决方案提供商。其易于使用的开发工具和全面的产品组合使客户能够创建最佳的设计，从而在降低总系统成本和上市时间的同时降低风险。该公司的解决方案服务于工业、汽车、消费者、航空航天和国防、通信和计算市场的120,000多家客户。总部设在亚利桑那州钱德勒。
www.microchip.com
美国
微芯
芯片
Arm Cortex-M0+
12.7 x 20.2 mm
2
– 2.01 μA sleep current
– 3.91 mA peak TX current(2)
– 5.24 mA peak RX current
– 15.1 μA average advertisement current
Bluetooth v5.0, FCC CFR47 Part 15, ARIB STD-T66, and TELEC
26 MHz
Brown-out Detector and Power-on Reset (POR)
-
26 MHz
-95 dBm/-93 dBm
Manual
Surface mount module
no
ATBTLC1000-MR110CA
2
-55 dBm to +3.5 dBm
26 MHz
24
no
蓝牙低功耗, 蓝牙模块
5
no
32 kHz Real Time Clock crystal oscillator (RTC XO)
微芯
32 kHz
no
128
32.768 kHz
1 × TWI master and slave
-
有
-
The ATBTLC1000-MR110CA is an ultra-low power Bluetooth® Low Energy (BLE) module with IntegratedThe ATBTLC1000-MR110CA is an ultra-low power Bluetooth® Low Energy (BLE) module with IntegratedTransceiver, Modem, MAC, PA, TR Switch, and Power Management Unit (PMU). It can be used as aBluetooth Low Energy link controller or data pump with external host MCU.The qualified Bluetooth SIG protocol stack is stored in dedicated ROM. The firmware includes L2CAPservice layer protocols, Security Manager, Attribute protocol (ATT), Generic Attribute Profile (GATT), andthe Generic Access Profile (GAP). Additionally, application profiles such as Proximity, Thermometer,Heart Rate, Blood pressure and many other SIG-defined profiles.The ATBTLC1000-MR110CA is a fully-certified module that contains the ATBTLC1000A-MU (QFN),ceramic high-gain chip antenna, 26 MHz crystal, and PMU circuit. The module needs an external 32 kHzclock or crystal to power-up.Microchip BluSDK offers a comprehensive set of tools including reference applications for severalBluetooth SIG defined profiles and a custom profile. The BluSDK helps the user to quickly evaluate,design and develop BLE products with ATBTLC1000-MR110CA.The ATBTLC1000-MR110CA module has passed the Bluetooth SIG certification for interoperability withthe Bluetooth Low Energy 5.0 specification.
15
有
128-bit AES, Secure Hash Algorithm (SHA) - 256
Complies with Bluetooth v5.0, FCC CFR47 Part 15, ARIB STD-T66, and TELEC;
Four-channel Direct Memory Access (DMA) controller;
Brown-out Detector and Power-on Reset;
Three-axis quadrature decoder;
One Serial Peripheral Interface (SPI) Master/Slave;
Two Inter-Integrated Circuit (I2C) Master/Slave;
One SPI Flash;
Four Pulse Width Modulation (PWM) channels, three General Purpose Timers, and one Wakeup
Timer;
2-channel 11-bit Analog-to-Digital Converter (ADC)
1 × USB Full-speed device
One Serial Peripheral Interface (SPI) Master/Slave
128
-
-
Single Wire Debug (SWD)
no
ATBTLC1000-MR110CA-Data-Sheet-DS70005393A.pdf
32-bit 26 MHz
no
2
-
2-channel 11-bit
0.00
1.8V~ 4.3V
0
 
no
-40℃ ~ +85℃
no
yes
no
-
29 x 15 x 2.5 mm
1
Qualified for Bluetooth v5.0 Specification – HFP v1.6, HSP v1.1, A2DP v1.2, AVRCP v1.5, SPP v1.0, PBAP v1.0 – Bluetooth Classic, Basic Rate/Enhanced Data Rate (BDR/EDR)
• One Line-in Port for External Audio Input • Two LED Drivers • One UART Interface • Multiple I/O Pins for Control and Status • High-Speed HCI-UART Interface (supports up to 921,600 bps)
立体声
no
no
-
-91 dB (π/4 DQPSK)
Manual
Surface mount module
no
BM20/23
0
+4 dBm (maximum) for Class 2
BM20:40/BM23:43
no
蓝牙低功耗, 蓝牙模块, 蓝牙音频
5
no
no
微芯
no
no
no
no
-
-
-
The BM20/23 stereo audio module is a Bluetooth v5.0 (BDR/EDR) audio module for designers to add wireless audioThe BM20/23 stereo audio module is a Bluetooth v5.0 (BDR/EDR) audio module for designers to add wireless audioand voice applications to their products. This Bluetooth SIG-certified module provides a complete wireless solutionwith Bluetooth stack, integrated antenna, and worldwide radio certifications in a compact surface mount package.This stereo module contains a built-in Li-Ion charger and a digital audio interface (BM23). It supports HSP, HFP, SPP,A2DP, and AVRCP profiles. Both AAC and SBC Codecs are supported for A2DP.
Note: The customers must connect their own external analog Codec/DSP/amplifier and MCU for audio output.
Audio processor:
• Support 64 Kbps A-Law, μ-Law PCM format/Continuous Variable Slope Delta Modulation (CVSD) for SCO
• Support 64 Kbps A-Law, μ-Law PCM format/Continuous Variable Slope Delta Modulation (CVSD) for SCOChannel Operation
• Noise Reduction (NR) and Acoustic Echo Cancellation (ACE)
• Sub-Band Coding (SBC) and Optional Advanced Audio Coding (AAC) Decoding
• Packet Loss Concealment (PLC)
• Four Languages (Chinese/ English/ Spanish/ French) Voice Prompts Support (20 events for each language)using the IS20XXS_UI tool
• Serial Copy Management System (SCMS-T) Content Protection
 
Mic in:
BM20:2个
BM23:1个
 
Analog Audio Out
BM20:没有
BM23:有
Digital Audio Out
BM20:有
BM23:没有
 
 
12
-
128-bit AES
Bluetooth Classic (BDR/EDR)
Embedded Bluetooth stack
SBC, ACC Codecs
Stereo analog output, one stereo analog microphone, aux input
UART, two LEDs, GPIOs
Built-in voice prompts
Transparent UART mode for seamless serial data over UART interface
Easy to configure with Windows GUI or directly via an MCU
Compact surface mount module: 29 x 15 x 2.5 mm
Castellated surface mount pads for easy and reliable host PCB mounting
RoHS compliant
Worldwide RF regulatory certifications
PCB Antenna
no
no
• Bluetooth Sound Bar • Bluetooth Stereo •Speaker Phone
-
-
-
no
BM20-23-Bluetooth-Stereo-Audio-Module.pdf
no
no
No
-
16-bit ADC Codec
0.00
20-Bit DAC;98 dB Signal-to-Noise ratio (SNR) DAC Playback
3.0V~ 4.2V
0
 
no
-20℃ ~ 70℃
no
-
no
Arm Cortex-M0+
29 x 15 x 2.5mm
2
– 2.01 μA sleep current
– 3.91 mA peak TX current(2)
– 5.24 mA peak RX current
– 15.1 μA average advertisement current
Bluetooth v5.0, FCC CFR47 Part 15, ARIB STD-T66, and TELEC
– 1.8V to 4.3V input range for PMU – 1.62V to 4.3V input range for I/O – Fully integrated Buck DC/DC converter
32 MHz
no
-
-95 dBm/-93 dBm programmable receiver sensitivity
Manual
Surface mount module
no
BM62
支持
-55 dBm to +3.5 dBm programmable Tx output power
26 MHz
37
no
蓝牙低功耗, 蓝牙模块
5
no
– ARM® Cortex®M0 32-bit processor – Single Wire Debug (SWD) interface – Four-channel Direct Memory Access (DMA) controller – Brown-out Detector and Power-on Reset (POR) – Watchdog timer
32 kHz Real Time Clock crystal oscillator (RTC XO)
Four Pulse Width Modulation (PWM) channels, three General Purpose Timers, and one Wakeup
Timer
微芯
no
no
Bluetooth 5.0, FCC, CFR47 Part 15, ARIB STD-T66, TELEC
128
no
no
2 Mbps
One Serial Peripheral Interface (SPI) Master/Slave;One SPI Flash
有
-
ARM® Cortex®M0 32-bit processor
The ATBTLC1000-MR110CA is an ultra-low power Bluetooth® Low Energy (BLE) module with IntegratedThe ATBTLC1000-MR110CA is an ultra-low power Bluetooth® Low Energy (BLE) module with IntegratedTransceiver, Modem, MAC, PA, TR Switch, and Power Management Unit (PMU). It can be used as aBluetooth Low Energy link controller or data pump with external host MCU.The qualified Bluetooth SIG protocol stack is stored in dedicated ROM. The firmware includes L2CAPservice layer protocols, Security Manager, Attribute protocol (ATT), Generic Attribute Profile (GATT), andthe Generic Access Profile (GAP). Additionally, application profiles such as Proximity, Thermometer,Heart Rate, Blood pressure and many other SIG-defined profiles.The ATBTLC1000-MR110CA is a fully-certified module that contains the ATBTLC1000A-MU (QFN),ceramic high-gain chip antenna, 26 MHz crystal, and PMU circuit. The module needs an external 32 kHzclock or crystal to power-up.Microchip BluSDK offers a comprehensive set of tools including reference applications for severalBluetooth SIG defined profiles and a custom profile. The BluSDK helps the user to quickly evaluate,design and develop BLE products with ATBTLC1000-MR110CA.The ATBTLC1000-MR110CA module has passed the Bluetooth SIG certification for interoperability withthe Bluetooth Low Energy 5.0 specification.
10
有
128-bit AES, Secure Hash Algorithm (SHA) - 256
ARM® Cortex®M0 32-bit processor;
Four-channel Direct Memory Access (DMA) controller;
– 12 digital and 1 wake-up GPIO;
Two Mixed signal GPIOs;
Programmable 96 kOhm pull up or pull-down resistor for each GPIO;
Retention capable GPIO pads;
Three-axis quadrature decoder
no
One Serial Peripheral Interface (SPI) Master/Slave
128
-
-
Single Wire Debug (SWD)
no
BM62-BM64.pdf
no
no
2
-
2-channel 11-bit Analog-to-Digital Converter
0.00
3.2 V~ 4.2 V
0
 
no
-20 ℃ ~ +70 ℃
no
-
no
-
32 x 15 x 2.5 mm
Class 1: +15 dBm;
Class 2: +2 dBm;
Built-in lithium-ion and lithium-polymer battery charger (up to 350 mA)
Sub-band Coding (SBC) and optional Advanced Audio Coding (AAC) decoding
no
no
-
-90 dBm (2 Mbps EDR)
Manual
Surface mount module
no
Supports up to 24-bit, 96 kHz I2S digital audio
BM64
0
43
64 kbps
no
蓝牙低功耗, 蓝牙双模, 蓝牙模块, 蓝牙音频
5
no
no
微芯
no
no
no
no
2 Mbps
-
Yes
Compliance Class 1，Class 2；
Certified to the United States (FCC), Innovation,Science and Economic Development Canada (ISED), European Economic Area (CE), Korea (KCC), Taiwan (NCC), Japan (MIC), China
(SRRC), and Brazil (ANATEL) radio regulations
 
Supports Bluetooth 5.0 dual-mode
- BDR/EDR transport for audio, voice, andSPP data exchange
- BLE transport for proprietary transparentservice and Apple Notification Center Service(ANCS) data exchange
 
High-speed HCI-UART interface (supports up to921,600 bps)
 
Peripherals
• Built-in lithium-ion and lithium-polymer batterycharger (up to 350 mA)
• Integrated 1.8V and 3V configurable switchingregulator and Low-Dropout (LDO) regulator
• Built-in ADC for battery monitoring and voltagesense
• Built-in ADC for charger thermal protection
• Built-in Undervoltage Protection (UVP)
• An auxiliary input port for external audio input
• Two LED drivers
• Multiple I/O pins for control and status
 
DSP Audio Processing
• Supports 64 kbps A-Law, A-Law PCM format/Continuous Variable Slope Delta (CVSD) modulationfor SCO channel operation
• Supports 8/16 kHz noise suppression
• Supports 8/16 kHz echo cancellation
• Supports Modified Sub-Band Coding (MSBC)decoder for wide band speech
• Built-in High Definition Clean Audio (HCA) algorithmsfor both narrow band and wide bandspeech processing
• Packet loss concealment (PLC)
• Built-in audio effect algorithms to enhance audiostreaming
• Supports Serial Copy Management System(SCMS-T) content protection
12
有
128-bit AES
• Qualified for Bluetooth v5.0 specification
• Supports A2DP 1.3, AVRCP 1.6, HFP 1.6, HSP
1.2 and SPP 1.2
• Supports Bluetooth 5.0 dual-mode (BDR/EDR/
BLE) specifications
• Stand-alone module with on-board PCB antenna
and Bluetooth stack
• Supports high resolution up to 24-bit, 96 kHz
audio data format
• Supports Bluetooth Low Energy data rate up to
1Mbits/s
• Supports connection of two hosts with HFP/A2DP
profiles simultaneously
• Transparent UART mode for seamless serial data
over UART interface
• Supports virtual UART communication between
host MCU and smartphone applications by Bluetooth
SPP or BLE link
• Easy to configure with Windows® GUI or directly
by external MCU
• Supports firmware field upgrade
• Supports one microphone
• Compact surface mount module:
- BM62: 29 x 15 x 2.5 mm
- BM64: 32 x 15 x 2.5 mm
• Castellated surface mount pads for easy and
reliable host PCB mounting
• RoHS compliant
• Ideal for portable battery-operated devices
• Internal battery regulator circuitry
no
• Built-in ADC for battery monitoring and voltage sense • Built-in ADC for charger thermal protection • Built-in Undervoltage Protection (UVP)
no
• Portable speaker • Multiple speakers • Headset
-
-
-
Low-Dropout (LDO) regulator
BM62-BM64.pdf
no
no
1.8V and 3V configurable switching regulator
16-bit ADC with 92 dB SNR
0.00
20-bit DAC with 98 dB SNR
3.2 V~ 4.2 V
0
 
no
-20 ℃ ~ +70 ℃
no
-
有
-
9 x 11.5 x 2.1mm
•Supports UA
Two low power modes supported, with wake up through GPIO or internal timer
•Average current: Tx=3.3 mA and Rx=3.2 mA with buck at 3.0V VBAT input and 18.75 ms connection interval, when transmitting full data packets to achieve a data rate of approximately 8.6 kbps
FCC, ISED, MIC, KCC, NCC, and SRRC
Compliant to RoHS
32 MHz
no
-
32 MHZ
Manual
Surface mount module
no
BM70/71
0
32 MHZ
BM70:33/BM71:16
no
蓝牙低功耗
5
no
no
BM70:supports 3-channel PWM;
BM71: supports 1-channel PWM
微芯
no
no
no
no
-
-
-
PWM
BM70:supports 3-channel PWM;
BM71: supports 1-channel PWM
 
Antenna
•Chip antenna (BM7xBLES1FC2) range based on open air measurement and phone-module connection:
-BM70: up to 50m
-BM71: up to 10m
•External antenna (BM7xBLE01FC2) connection through RF pad
 
RF Features
•ISM band 2.402 GHz to 2.480 GHz operation
•Channels: 0 to 39
•Receive Sensitivity: typical -90 dBm (LE)
•Transmit Power: 0 dBm (typical)
•Received Signal Strength Indication (RSSI) monitor with 1 dB resolution
BM70:18/BM71:9
-
128-bit AES
•Certified by European RED Assessed Radio module
•Compliant to RoHS
•Supports UART interface
•Supports transparent UART data service of BLE
no
Supports Precision Temperature Sensor (PTS) for ambient temperature detection
No
•Internet of Things (IoT) •Secure Payment •Wearable Devices •Home and Security •Health and Fitness •Beacons •Industrial and Data Logger
-
-
-
no
BM70-71_BLE-Module.pdf
no
no
No
-
BM70:8-channel ADC/BM71:5-channel ADC
0.00
1.9V~ 3.6V
0
 
no
-40℃ ~ +85℃
no
-
Precision Temperature Sensor (PTS) for ambient temperature detection
-
22 x 12 x 2.4 mm, 15 x 12 x 1.8mm
FCC, ISED, MIC, KCC, SRRC and NCC
no
no
-
-90 dBm (BR/EDR), -92 dBm (LE)
Manual
Surface mount module
no
BM78
-
+1.5 dBm
33
no
蓝牙低功耗, 蓝牙双模, 蓝牙模块
5
no
no
微芯
no
no
no
no
-
-
-
Bluetooth® Dual-Mode Module：Bluetooth Classic (BR/EDR) and Low Energy (LE)
 
•Bluetooth 3.0: GAP, SPP, SDP, RFCOMM, and L2CAP
•Bluetooth Profiles: GAP, GATT, ATT, SMP, and L2CAP
 
Data Throughput at 1 Mbps UART Baud Rate:
•BR/EDR: up to 32 Kbytes/s
•LE: up to 7 Kbytes/s
Data Throughput at 115200 bps UART Baud Rate:
•BR/EDR: up to 10 Kbytes/s
•LE: up to 6 Kbytes/s
 
7
-
128-bit AES
•Radio Equipment Directive (RED) Assessed Radio Module
•Bluetooth 5.0 Certified
•Transparent UART mode for Seamless Serial Data over UART Interface
•Easy to Configure with User Interface (UI) Tool, a Windows®-based Utility or Directly by MCUs
•Firmware can be Upgraded in the Field over UART (Flash version only)
•Integral Chip Antenna (BM78SPPS5MC2/NC2) or
External Antenna (BM78SPP05MC2/NC2)
•Integrated Crystal, Internal Voltage Regulator, and Matching Circuitry
•Configurable I/O Pins for Control and Status
•Supports Apple® iPod® Accessory Protocol (iAP2), (only BM78SPPx5MC2)
•Supports Bluetooth Low Energy Secure Connections
•Supports Bluetooth Low Energy Data Packet Length Extension
•Small and Compact Surface Mount Module
•Castellated Surface Mount Pads for Easy and Reliable Host PCB Mounting
•Ideal for Portable Battery-Operated Devices
•One LED Driver with 16 Step Brightness Control
no
No
•Internet of Things (IoT) •Secure Payment •Home and Security •Health and Fitness •Industrial and Data Logger •LED Lighting (16 configurations)
-
-
-
1 stage LDO and DC/DC
BM78.pdf
no
no
No
-
No
0.00
3.3V~ 4.2V
0
 
no
-20℃ ~ +70℃
no
-
有
-
22 x 12 x 2.4 mm
32 MHz
no
-
-90 dBm (BR/EDR), -92 dBm (LE)
Manual
Surface mount module
64 MHz
RN4678
0
+1.5 dBm (Class 2)
33
32.768 kHz
蓝牙低功耗, 蓝牙双模, 蓝牙模块
5
no
32.768 kHz
微芯
no
32.768 kHz
no
no
-
-
-
•Bluetooth Classic: GAP, SPP, SDP, RFCOMM and L2CAP
•Bluetooth Low Energy: GAP, GATT, ATT, SMP and L2CAP
 
Data ThroughputData
Throughput at 1 Mbps UART Baud Rate:
•BR/EDR: up to 32 Kbytes/s
•LE: up to 7 Kbytes/s
Data Throughput at 115200 bps UART Baud Rate
•BR/EDR: up to 10 Kbytes/s
•LE: up to 6 Kbytes/s
8
-
128-bit AES
•Bluetooth® Classic (BR/EDR) and Low Energy (LE)
•Certified to FCC, ISED, MIC, KCC, NCC, and SRRC Radio Regulations
•European Radio Equipment Directive (RED) Assessed Radio Module
•Qualified for Bluetooth SIG v5.0 Core Specification
•Transparent UART mode for Seamless Serial Data over Bluetooth Classic using Serial Port Profile (SPP), and Bluetooth Low Energy (BLE) using Generic Attribute (GATT) Profile
•Easily Programmable through ASCII Commands and Easily Configurable with Available PIC® MCU Driver Library
•Firmware can be Upgraded in the Field over UART (Flash version)
•Integral Chip Antenna (RN4678)
•Integrated Crystal, Internal Voltage Regulator, and Matching Circuitry
•Available Configurable I/O Pins for Control or Status Indication
•Supports Apple® iPod® Accessory Protocol (iAP2) (only RN4678APL)
•Supports Bluetooth LE Secure Connections
•Bluetooth LE Data Packet Length Extension
•Small and Compact Surface Mount Module
•Castellated SMT Pads for Easy and Reliable PCB Mounting
•Ideal for Portable Battery-Operated Devices
no
no
•Internet of Things (IoT) •Secure Payment •Home and Security •Health and Fitness •Industrial and Data Logger •LED Lighting (16 configurations)
-
-
-
no
RN4678.pdf
no
no
3
-
0.00
3.2V~4.3V
0
 
no
-20℃ ~ 70℃
no
-
no
-
4870:Shield 12 x 22 mm, Unshield 12x15mm
支持
no
no
-
-90 dBm
Supports Over-the-Air upgrade (OTA)
Surface mount module
no
RN4870/71
0
0 dBm
RN4870:33/RN4871:16
no
蓝牙低功耗
5
no
no
4870:3
微芯
no
no
no
no
-
-
-
•GAP, GATT, SM, L2CAP and Integrated Public Profiles
•Customer Can Create up to Five Public and Four Private Services
•Keyboard I/O Authentication
•Software Configurable Role as Peripheral or Central and Client or Server
 
Package：
•Compact Form Factor – The RN4870/71 family comes in four different sizes from 6 mm x 8 mm to 12 mm x 22 mm:
-RN4870: 12 mm x 22 mm
-RN4871: 9 mm x 11.5 mm
-RN4870U: 12 mm x 15 mm
-RN4871U: 6 mm x 8 mm
 
RN4870:18/RN4871:9
-
128-bit AES
•Qualified for Bluetooth SIG v5.0 Core Specification
•Certified to FCC, ISED, CE, KCC, NCC and SRRC
•On-Board Bluetooth Low Energy (BLE) Stack
•ASCII Command Interface API over UART
•Scripting Engine for Hostless Operation
•Compact Form Factor – The RN4870/71 family comes in four different sizes from 6 mm x 8 mm to 12 mm x 22 mm:
-RN4870: 12 mm x 22 mm
-RN4871: 9 mm x 11.5 mm
-RN4870U: 12 mm x 15 mm
-RN4871U: 6 mm x 8 mm
•Beacon Private Service for Beacon Services
•UART Transparent Service for Serial Data Applications
•Remote Configuration Over-the-Air
no
RSSI Monitor
No
•Health/Medical Devices •Sports Activity/Fitness Meters •Beacon Applications •Internet of Things (IoT) Sensor Tag •Remote Control •Wearable Smart Devices and Accessories •Smart Energy/Smart Home •Industrial Control
-
-
-
no
RN4870-71-BLE-Module.pdf
no
no
3(4870)
-
RN4870:8/RN4871:5
0.00
1.9V~ 3.6V
0
 
no
-40℃ ~ +85℃
no
-
no