- 帖子: 179
- 感谢您收到 0
S112 SoftDevice
- btt
- [btt]
- 帖子作者
- 离线
- 管理员
Less
更多
2020-08-23 20:23 #69
由 btt
新帖
The S112 SoftDevice is a Bluetooth® Low Energy peripheral protocol stack solution. It supports up to four peripheral connections with an additional broadcaster role running concurrently. The S112 SoftDevice integrates a Bluetooth Low Energy Controller and Host, and provides a full and flexible API for building Bluetooth Low Energy nRF52 System on Chip solutions.
Key features
1. Bluetooth 5.1 compliant single-mode Bluetooth Low Energy protocol stack
-Up to four peripheral connections and one broadcaster running concurrently
-Configurable number of connections and connection properties
-Configurable attribute table size
-Custom UUID support
-Link layer supporting LE 1M PHY and LE 2M PHY
-LL Privacy
-ATT and SM protocols
-LE Secure Connections pairing model
-GATT and GAP APIs
-GATT Client and Server
-Configurable ATT MTU
2. Complementary nRF5 SDK including Bluetooth profiles and example applications
3. Master boot record for over-the-air device firmware update
-SoftDevice, application, and bootloader can be updated separately
4. Thread-safe supervisor-call based API
5. Asynchronous, event-driven behavior
6. No RTOS dependency
-Any RTOS can be used
7. No link-time dependencies
-Standard ARM® Cortex®- M4 project configuration for application development
8.Support for concurrent and non-concurrent multiprotocol operation
-Concurrent with the Bluetooth stack using Radio Timeslot API
-Alternate protocol stack in application space
9. Support for control of external power amplifiers and low noise amplifiers
Key features
1. Bluetooth 5.1 compliant single-mode Bluetooth Low Energy protocol stack
-Up to four peripheral connections and one broadcaster running concurrently
-Configurable number of connections and connection properties
-Configurable attribute table size
-Custom UUID support
-Link layer supporting LE 1M PHY and LE 2M PHY
-LL Privacy
-ATT and SM protocols
-LE Secure Connections pairing model
-GATT and GAP APIs
-GATT Client and Server
-Configurable ATT MTU
2. Complementary nRF5 SDK including Bluetooth profiles and example applications
3. Master boot record for over-the-air device firmware update
-SoftDevice, application, and bootloader can be updated separately
4. Thread-safe supervisor-call based API
5. Asynchronous, event-driven behavior
6. No RTOS dependency
-Any RTOS can be used
7. No link-time dependencies
-Standard ARM® Cortex®- M4 project configuration for application development
8.Support for concurrent and non-concurrent multiprotocol operation
-Concurrent with the Bluetooth stack using Radio Timeslot API
-Alternate protocol stack in application space
9. Support for control of external power amplifiers and low noise amplifiers