|
/*------------------------------------------------------------------------------------
版权说明：Copyright 2022 Robottime(Beijing) Technology Co., Ltd. All Rights Reserved.
Distributed under MIT license.See file LICENSE for detail or copy at
https://opensource.org/licenses/MIT
by 机器谱 2022-5-30 https://www.robotway.com/
-------------------------------------------------------------------------------------*/
//待救援主控例程
//配置模块：(模块在配置时与正常工作时TX、RX线序不同，请注意)
//第一步：使用AT指令将所使用的两个模块其中一个设置为主模式，另外一个为从模式；所有模块波特率全部为默认的9600，并记录主从模块的地址(AT+ADDR?);
//第二步：将主模块在未连接时清除之前的配对信息(AT+CLEAR),再设置其工作类型为类型1(AT+IMME即上后处于等待状态，收到AT+START,AT+DISC,AT+CONNL等指令后开始工作）；
//开始工作：
//第三步：将所有模块上电(主从模块按照上面介绍的连接方式连接即可);
//第四步：将本程序下载进MEGA2560中，将从模块分别摆开，观察显示屏数据；
/*********从设备地址********/
// "D8A98B788750",
// "D8A98B788732",
// "380B3CFFC5B0"
/*********从设备地址********/
/**********头文件***************/
#include <Arduino.h>
#include <Wire.h>
#include <MultiLCD.h>
#include <RssiPositionComputer.h>
/***********宏定义**************/
//#define DEBUG_SERIAL Serial //打印信息串口
#define CON_SERIAL Serial1 //蓝牙通信串口
#define SEND_SERIAL Serial2 //数据发送串口
#define CMD_CON "AT+CON"
#define CMD_DIS_CON "AT"
#define CMD_GET_RSSI "AT+RSSI?"
RssiPositionComputer myPositionComputer;
Point2D master_point;
//基站数量
#define SLAVENUMBER 3
//基站地址
String BLUETOOTHADDRESS[3] = {
"D8A98B788750",
"D8A98B788732",
"380B3CFFC5B0"
};
//位置发送蓝牙地址
// F83002253650
String search_result_string[SLAVENUMBER] = {""};
String rssi[SLAVENUMBER] = {""};
float distance[SLAVENUMBER] = {};
void setup() {
#if defined(DEBUG_SERIAL)
DEBUG_SERIAL.begin(9600);
#endif
CON_SERIAL.begin(9600);
SEND_SERIAL.begin(9600);
delay(1000);
init_ble();
}
void loop() {
read_ble(BLUETOOTHADDRESS);
to_axis(distance, &master_point);
}
//读取串口
String serial_read(int _len){
String data = "";
int len = 0;
unsigned long t = millis() + 500;
while(1)
{
while(CON_SERIAL.available()){
char c = CON_SERIAL.read();
data += c;
len++;
}
if(len == _len){
break;
}
if(millis() > t)
break;
}
#if defined(DEBUG_SERIAL)
//DEBUG_SERIAL.println(data);
#endif
return data;
}
//初始化
void init_ble(){
CON_SERIAL.print(CMD_DIS_CON);delay(100);
serial_read(2);
}
//获取设备 RSSI
void read_ble(String * address){
for(int i=0;i
CON_SERIAL.print(CMD_DIS_CON);delay(100);
serial_read(2);
CON_SERIAL.print(CMD_CON + address[i]);
serial_read(8);
delay(500);
CON_SERIAL.print(CMD_GET_RSSI);
String rssi_str = serial_read(10);
String _rssi = rssi_str.substring(7, rssi_str.length());
//rssi
rssi[i] = _rssi;
//distance
distance[i] = rssiToDistance(rssi[i].toFloat());
#if defined(DEBUG_SERIAL)
DEBUG_SERIAL.println("BLE_" + String(i) + ": " + rssi[i]);
//DEBUG_SERIAL.println("BLE_" + String(i) + ": " + distance[i]);
#endif
//delay(800);
}
}
//计算距离
float rssiToDistance(float rssi){
float dis = 0;
//dis = pow(10.0,((abs(rssi)-56)/10.0/1.05));
dis = pow(10.0,((abs(rssi)-56)/5.0/1.65));
return dis;
}
//转换为2d坐标x,y
void to_axis(float * dis, Point2D* actual_master_point){
//myPositionComputer.distanceToPoint(*dis,*(dis+1),*(dis+2),actual_master_point);
myPositionComputer.distanceToPoint(*dis,*(dis+1),random(0,77),actual_master_point);
int x = master_point.x*100;
int y = master_point.y*100;
char point[100];
sprintf(point, "[ax:%3d,ay:%3d]\n",abs(x),abs(y));
#if defined(DEBUG_SERIAL)
DEBUG_SERIAL.println(point);
#endif
SEND_SERIAL.print(point);
}
|
